Our DIY Semi-Permanent Tattoo Paper produces high-quality artwork on your skin! Perfect for testing a tattoo design before committing or fun for kids! These transfer papers allow you to print your own designs onto your skin. You can just printing any image you want with a normal desktop printer, and you don’t need any special machine certainly. This product is made of natural materials, and it proved harmless to the human body. It is easy to create your own tattoo by simple cutting without any side effects. Safety: SAFE to use on skin. Adhesive sheets are in compliance with relevant safety regulations and approved by the FDA. Operation Process Step 1. Design your tattoos in any graphic software program. Step 2. Printer setup: Photo glossy paper, Mirror print. Step 3. Print your tattoo designs on the glossy side of temporary tattoo paper. Step 4. Dry the ink by hair dryer or let it dry naturally, 1 minute by hair dryer, or 10 minutes dry naturally. Step 5. Remove the first side of the adhesive sheet and apply it to the printed side of the tattoo set. Be careful to remove all air bubbles. Step 6. Use your scissors to cut around each tattoo design, keeping as close as possible to the tattoo. Step 7. When choosing a place to apply your skin tattoo, you should choose one that is free of body hair. Step 8. Wash the selected area and dry thoroughly. The skin should be dry when the temporary tattoo is applied. Step 9. Make sure your hands are dry before removing the second side of the adhesive backing. Apply the tattoo to your skin and press firmly for 20 seconds. Step 10. Wet the release liner with a slightly wet sponge for 60 seconds. When the paper is thoroughly wet (you will be able to see the tattoo image through the water slide decal paper), remove the release liner to reveal the temporary tattoo.
